SB166 HPPE Bulletproof Fabric / UHMWPE UD

SB166 HPPE bulletproof fabric / UHMWPE UD is made from >43cN/dtex (>48g/D) UHMWPE fiber and main for soft bulletproof vest application. It is using 6 plies Uni-Directional (0/90/0/90/0/90 UD) structure which is well known best for anti-ballistic fabrics today. The weight per square meter for 7.62x25mm TT lead core @ 445m/s protection only needs ~4kg after tested.

Additional information

Model Number

SB166

Raw Material

UHMWPE fiber

Tenacity

>43cN/dtex (48g/D)

Area Density

160g/m2 (or 225g/m2)

Structure

6 ply UD (0/90/0/90/0/90)

Status

Film cover on both sides

Width

1.6 meters

Length

100+ meters in roll

Application

Soft Bulletproof Vest

Specification of HPPE Bulletproof Fabric, UHMWPE UD

The bulletproof fabric is made from high-strength UHMWPE fiber with a Uni-Directional (UD) structure. The high-strength UHMWPE fiber has good performance when against the impact of the high velocity of bullets and, the UD structure can transfers the power quickly than women fabric in a short time. For more, see How to make bulletproof fabric / UHMWPE UD?

HPPE UD Bulletproof Fabric Line
bulletproof vest ud fiber

The UHMWPE fiber used for SB166 is 800D as standard. Its tenacity is over 43cN/dtex today which is the best solution for high performance and lightweight bulletproof fabric / UHMWPE UD. Below is the history of SB166.

  • 2015   ->   32cN/dtex   ->  36 layers for NIJ IIIA .44 magnum
  • 2017   ->   34cN/dtex   ->  34 layers for NIJ IIIA .44 magnum
  • 2019   ->   36cN/dtex   ->  32 layers for NIJ IIIA .44 magnum
  • 2019   ->   38cN/dtex   ->  30 layers for NIJ IIIA .44 magnum
  • 2020   ->   43cN/dtex   ->  25 layers for NIJ IIIA .44 magnum

For more, see What is Ultra High Molecular Weight Polyethylene Yarn?

HPPE Bulletproof Fabric

Certificate of HPPE Bulletproof Fabric, UHMWPE UD

Application of HPPE Bulletproof Fabric, UHMWPE UD

That has different using of UHMWPE UD bulletproof fabric and main for making bulletproof soft armor vest when used together with anti-trauma foam. It is easy to cut by laser or another professional cutter. And can add more layers than the minimum to reduce deformation if required. Below are reference layers or area densities of SB166 for some protected levels. For more, see How to make a bulletproof vest?

  • 25-28 layers (>4.0kg/m2) for NIJ 0101.06 IIIA .44 magnum
  • 25 layers (>4.0kg/m2) for 7.62×25 TT (lead core)  @ 445m/s
  • 28 layers (>4.5kg/m2) for 7.62×25 TT (lead core)  @ 515m/s
guodun soft armor panel (12)
Send A Message
Not wait, let's support you huge quantity in short time!
Subject:
SB166 HPPE Bulletproof Fabric / UHMWPE UD




    Your Requirements